The 640 MEG Shareware Studio 2

home *** CD-ROM | disk | FTP | other *** search

/ The 640 MEG Shareware Studio 2 / The 640 Meg Shareware Studio CD-ROM Volume II (Data Express)(1993).ISO / bbs / sfued106.zip / README17.SFU < prev next >

Wrap

Text File | 1992-01-18 | 15KB | 282 lines

StormFront User Editor for the Opus CBCS Programmed by Kevin Silcox January 18, 1992 Disclaimer ---------- This software is available "AS IS". It is not guaranteed to work at all. If it trashes your system or ruins your life, you have been warned. I am not responsible for any damages incurred from the use or misuse of this software. There is also no fee to use this software. You will have to get by without any real documentation until I, or someone else write some for this program. If you know Opus and how it works, then this program should be pretty much self-explanatory as far as what the actual changes to the user database do. So for now, there's only a brief description of how to use the actual functions of the program. Even though SFUE17 isn't the most user-friendly program, I think that its flexibility is worth the struggle you may go through when you first start to use it. Enjoy! ------------------------------------------------- This version: 1.06 ---> For Opus v1.7x **-- Version numbers with a lowercase letter are beta versions. --** Requires approximately 100K of Available RAM. Requires more if using the Sort option (based on number of records in your database --> about 28 bytes for each record, up to a maximum of about 2300 records). This program is for maintaining the user database used with Opus. It is capable of adding users to the USER.DAT file, marking them to be ReUsed, Purged, Normal, and even Removing users marked to be Purged (Zap), along with many other features. The program accepts a command-line argument for local and non- local use. The arguments are as follows: -M for Mono -C for Color -D for DOS Output -B for BIOS Writes -U to specify which User Database -Z to Zap the database file to use. The -M and -C options are only to force the memory address for the direct-screen writes if the program doesn't recognize the correct video mode. If no arguments are entered, the program will AutoDetect which video mode to use for the direct-screen writes. Entering an argument other than those arguments listed will display a brief help screen. The -U allows you to specify the name of the User Database file that you want to use instead of the default USER.DAT. If you specify just the full path without a filename, USER.DAT will be assumed (you must have a "\" after the path though). *--===--* Whenever there has been a modification to the current user record, SFUE17 will place an asterisk '*' at the top right-hand side of the screen. There are two things that SFUE17 *may* change automatically. If the number of times a user has called the system is zero (0), it will be changed to one (1). Also, if the user has QkMenu (Return to Last Menu) turned on, SFUE17 will try to make sure the menu is valid. **==--==** In the lower right-hand corner of the User Screen are the commands that are available in all ScreenSections. Below is a brief description of what they do: R) Record Number: This allows you to go to a specific record number within the database. !) User Status: This allows you to modify the status of a user's record. The Status can be one of the following: Normal: This is a normal record. Reuse : As new users are added, they will be placed in records marked with this status instead of being added to the end of the database. Purge : This means that if you use the Zap function, the record will be removed from the database. Also used by OMAN. Update ID : This will update the caller ID number but should only be used if the caller_ID is all zero's. *) Utilities: This is for maintaining the database. These are: Adduser: If you need to add a user, this is what you'll use. It has gives you the option of just adding a record at the end of the database, or searching for a record marked with the "Reuse" status. If you choose to search for a record to Reuse, and there is a record marked with the Reuse status, then that record will be cleared of its information and you may start entering the new user information in that record. Global : Allows you to make certain changes to specific (or all) users. You may specify to set only a certain privilege level, or the default is all records (record #1 will NOT be touched). There are also sub-levels that I don't have time to go into. -=***=- I feel that the options for changing Keys and Sections may cause some confusion. With those two options there are 4 sub-options [Exact/Set/Toggle/Unselect]: Exact: Set each user to exactly the keys you specify. If you only select the 'A' key, that's the only key the users' will have no matter what they started out with. Set: All keys you specify will be turned ON for each user. Toggle: Exactly what it says... If you select the 'A' key each users' keys will be set to the opposite it started out as. Unselect: The opposite of Set. It will make sure each key you select is turned OFF. Import : This is if you want to add the users in USER.SAV back into the database. If successful, USER.SAV will be deleted and a new USER.SAV will be created with a size of zero bytes. This will allow you to Undelete the old savefile if necessary. Search : This allows you to search certain fields for a string. It's useful for finding a specific user quickly among other things. sOrt : This will sort your database based on the keys you select, and whether you select Ascending or Descending order for each key. You may select up to two keys to sort by. ** The sort is currently limited to about 1000 records maximum until I get the time to write a different sort routine other than the internal qsort(). ** sWap : This allows you to swap any two records with each other. Report : This generates a report for all users and sends it either to the Screen, Printer, or a File. You can Pause the output by pressing 'P', or have an option to Abort by pressing 'ESC'. You are asked several questions about how the report should be, but I don't have the time to go into detail explaining it... However, I will state that SFUE17 will NOT send control codes to the printer, but only format the report appropriately. Setting your printer into the proper font size and LPI setting is up to you. Zap : This removes any records marked with the Purge status. Also you can specify the number of days a user can go without calling the system before he/she is removed from the database. This option is also available from the command-line. By default a file called USER.SAV will be used to place any deleted records into. You may restore the records by using the Import option. +/-) Change Record Number: You can use either the plus and minus keys to increment/decrement the record number respectively, or use the right and left arrow keys to do the same thing. Home and End will place you at the first and last records respectively. ESC) Quit: If you have made any changes to the current record without going to another record, you will be asked if you want to save the user information before exiting. Anytime you change to another record, the current record is saved to disk if it has been modified. SPACE) {SpaceBar} ScrnSect: Changes the current Screen Section. The active ScrnSect is displayed at the top of the screen. The Screen Sections are at the left side of each box border. A ScrnSect must be active in order for its commands to be active. Also when a ScrnSect is active, the number next to the active box will BLINK. The ScrnSect can also be changed with the up and down arrow keys to decrement/increment the ScrnSect number respectively. F9) DOS Shell: Exactly what it says. The User Editor is NOT swapped out of memory. **==--==** I hope this is enough of a program description to get you familiar with the program. For Opus v1.7x the ScrnSect is not the same as the "Section" in Opus. Currently this Editor doesn't contain an internal index updating function. You will need to use the USERNDX program that is distributed with Opus v1.7x. The Editor will call USERNDX when exiting whenever it thinks the Index needs to be updated. USERNDX will only be called when you have made changes inside the Editor that might change the NDX file. USERNDX must either be located in the PATH, or in the same directory as your user database, or in your Opus Home Directory. ------------------------------------------------------ *********************** * Report Information: * *********************** ** Level of Detail Grouping (80-column output): ------------------------------------------------------ 1: A = User Record Number (Width = 5) B = User Name (Width = 26) C = Phone Number (Width = 15) D = City, State (Width = 25) -- 2: E = Street Address (Width = 26) F = Answer to SysOp Question (Width = 43) -- 3: G = SysOp Comment (Width = 44) H = Birthdate (Width = 9) I = Access Privilege (Width = 9) -- 4: J = Keys (Width = 32) K = Download:Upload Ratio (Width = 9) L = Days Since Last Call (Width = 4) M = Password (optional) (Width = 15) ------------------------------------------------------ ** Level of Detail Grouping (132-column output): ------------------------------------------------------ 1: A = User Record Number (Width = 5) B = User Name (Width = 26) C = Phone Number (Width = 15) D = City, State (Width = 25) E = Street Address (Width = 25) F = Alias (Width = 20) -- 2: G = Answer to SysOp Question (Width = 44) H = SysOp Comment (Width = 45) I = Birthdate (Width = 9) J = Password (optional) (Width = 15) -- 3: K = Access Privilege (Width = 9) L = Keys (Width = 32) M = Download:Upload Ratio (Width = 9) N = Days Since Last Call (Width = 4) O = First Call to System (Width = 11) ------------------------------------------------------ ------------------------------------------------------ Thank You for taking your time to read this, and use my program. If you have any comments or suggestions, I'd like to hear from you. Please contact me if you have any problems with the program, or you would like to see any added features. You may contact me (via NetMail) at the phone number (or FidoNet Address) listed below. I also read the NEWOPUS and MEADOW Echo's. The latest version of my software is also available on my BBS. It may be requested with the magic name of "SFUE17" for the Opus 1.7x version, and "SFUE11" for the Opus 1.1x version. --=={ Kevin Silcox ------ SysOp of: The StormFront BBS in Orangevale, California (916) 988-0407 FidoNet (1:203/407.0) BBS Hours: Conditionally 23 hours a day, but definately between: 11:00 p.m. and 11:00 a.m excluding National Mail Hour: 1:00 a.m to 2:00 a.m PST Since this phone number is also my voice number for now, there may be times when I pick up the phone instead of the computer. If this happens I'll immediately try to force the BBS to answer the phone so you don't have to call back. I'll try to make the line busy whenever I'm doing something on the computer that would prevent me from forcing the BBS to answer. Have fun! Special Thanks to my Beta Test Team for making suggestions that have increased the power (and flexibility) of SFUE17, and especially for finding those little critters that lurk around in most software!